PRODUCTION FLEXIBILITY
Wide temperature range from -20 up to 450°C enables production flexibility (whole gamut of cooling-heating possibilities: proofing, proofing retardation, slow proofing, fast cooling and freezing) – relative air humidity adjustable up to 98
MULTITASKING
Depending on the part of the “baking day,” the machine can be used as device serving multiple functions (from cooling, proofing, and storing, to re-cooling or freezing).
CUSTOM-TAILORED FOR YOUR NEEDS
We make 9-, 12-, 15-, 18-, 21-, 24-, and 26-rack chambers and bigger if required. We are able to adapt existing space for holding/proofing.
FEATURES
Expansion walls are responsible for even air distribution and circulation in whole chamber between racks and boards – it eliminates the risk of crusting.
Special system for joining walls and floors (locks) guarantees better security measures against humidity ingress. Lighting – high-end LED panels. Custom tailored to our needs industrial evaporator, powered by electronic expansion valve, unifies the cooling/proofing process.
Touch panel allows you to define up to 6 steps of each stage and to recall them at any given moment.
Multi-stage fan control assists the enzymatic effect developing taste and volume of the products.
PROOFING CHAMBERS
We can construct devices in many different configurations.
See below for two illustrative implementations
Two independent chambers with separate cooling and control systems joined by a partition wall with sliding door.
The walls are made of stainless steel from the inside, and on the outside in stainless steel housing as well but with a pattern. Door and doorframes, foot bars and the other parts are made of stainless steel as well. In each chamber, there are two coolers, two expansion walls along longer sides, LED lighting, floor made the same as the walls with an additional 2mm-thick stainless steel flooring.
2. Load temperature: <=+ 20°C
3. Chamber temperature adjustable between -15°C and +40°C
4. Humidity adjustable up to 99%
5. Production of housing made of polyurethane filled plate (80mm thick) in “camloock” system with double-sided stainless steel hull
6. Floor made same as walls with additional 2mm-thick stainless steel flooring
7. Sliding door 1100x2000mm 1pcs
8. Chamber placed inside a room shielded from weather conditions
9. Length: 4400mm
10. Width: 2400mm
11. Height: 2650mm
12. Power supply: 3f 400V 50Hz 5x2,5mm2 / 9,8 kW
13. Water: ½’ 3 bar
2. Load temperature: <=+ 20°C
3. Chamber temperature adjustable between -15°C and +40°C
4. Humidity adjustable up to 99%
5. Production of housing made of polyurethane filled plate (80mm thick) in “camloock” system with double-sided stainless steel hull
6. Floor made same as walls with additional 2mm-thick stainless steel flooring
7. Sliding door 1100x2000mm 1pcs swinging door 900x2000mm 1pcs
8. Chamber placed inside a room shielded from weather conditions
9. Length: 5300mm
10. Width: 2400mm
11. Height: 2650mm
12. Power supply: 3f 400V 50Hz 5x2.5mm2 / 11.3 kW
13. Water: ½’ 3 bar
sample projects
Gallery
CHAMBER SIZE 8600x3000mm
CHAMBER SPLIT INTO 4 DIFFERENT SIZE ROOMS
The walls are made of stainless steel from the inside, and on the outside in stainless steel housing as well but with a pattern. Door and doorframes, foot bars and the other parts are made of stainless steel as well. In each chamber, there are two coolers, two expansion walls along longer sides, LED lighting, floor made the same as the walls with an additional 2mm-thick stainless steel flooring. The door frame is heated to prevent gasket freezing.
ROOM 1
Playing the role of cooling chamber for product storage. There is a suspended ceiling and two expansion walls enabling the storage of, e.g. confectionery without the drying effect. Even air circulation with variable adjustment and the use of steam generator helps keeping required conditions (temperature, humidity, cooling intensity, or air flow) inside the room
ROOM 2
Freezing chamber for initially frozen products storage
ROOM 3
Freezing chamber for initially frozen products storage:
a./ with basic access through swinging door
b./ with a separated place and two stacked small access doors enabling loading small quantities
of products onto racks avoiding unnecessary entering into the chamber.
ROOM 4
Shock cooling chamber for quick and intense product cooling which then go to rooms 2 and 3
1. Cooling chamber 2300x2800mm (9 trolleys)
2. Freezing chamber 2100x2800mm (9 trolleys)
3. Freezing chamber 3800x2800mm (smaller by the size of shock chamber) (9 trolleys + shelf rack 400x1200mm)
4. Shock cooling chamber 1400x2300mm (2 trolleys)
CONTACT US
Leave your contact details below and our technical consultant will contact you and provide you with an offer.
Information provided within this form will be used only for sending you the offer. Your contact information is nor stored neither handed over to third-party companies.